Rohde & Schwarz R&S SMB100B - Page 86

Analog modulations
R&S
®
SMB100B
86User Manual 1178.3711.02 ─ 08
Each of these data sets contains predefined values for:
●
PI (program identification, identifies the broadcast station )
●
PS or scrolling PS (program service name, represents the station identity name)
●
TP (traffic program, mark stations with regular traffic programs )
●
TA (traffic announcement, marks the start of a traffic program)
●
PTY (program type, predefined genres of broadcasting programs, e.g. news)
●
PTYN (program type name)
●
DI (decoder information)
●
MS (music/speech)
●
CT (clock time, used for synchronization)
The following values are empty:
●
RT (radio text, two text blocks with 64 symbols each)
●
AF (alternative frequencies, maximum of five lists with 25 frequencies each, ena-
bles the receiver to retune to a different frequency providing the same station when
the first signal becomes too weak)
●
TMC (traffic message channel)
●
EON (enhanced other networks, eight PS with five EON AF lists each, enables the
receiver to tune into these stations automatically if traffic programs are broadcas-
ted)
The program identification and the program service name of the selected data set are
indicated in the menu.
Remote command:
[:SOURce]:STEReo:RDS:DATaset on page 445
Program Service Name
Indicates the RDS program service name.
Remote command:
[:SOURce]:STEReo:DIRect on page 439
Program Identification
Indicates the RDS program identification.
Remote command:
[:SOURce]:STEReo:DIRect on page 439
Traffic Program
Activates the RDS traffic program (TP function). The receiver can recognize a fre-
quency as being capable of traffic information only if the TP function is active.
Remote command:
[:SOURce]:STEReo:RDS:TRAFfic:PROGram[:STATe] on page 445
Traffic Announcement
Activates the RDS traffic announcement (TA function). If activated, the receiver
switches from the current status, e.g. playing a CD, to the receive mode and enables
the broadcast of a traffic announcement. The TP state has to be on.
Remote command:
[:SOURce]:STEReo:RDS:TRAFfic:ANNouncement[:STATe] on page 446
Modulation settings