Instrument Function
R&S
®
SMBV100A
358Operating Manual 1176.8016.02 ─ 17
Remote command:
[:SOURce<hw>]:BB:DM:FSK:DEViation on page 669
Angle Alpha
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
Remote command:
[:SOURce<hw>]:BB:DM:AQPSk:ANGLe on page 667
More - Modulation Type
Calls the submenu which displays the mapping of the currently selected modulation
type and the digital modulation delay in the case of an external data source.
The "Modulation - CW Switching" section can be used to enable switching of the signal
between modulated and unmodulated.
In case of selection "Variable FSK", the FSK type and the deviation for each symbols is
set in the "Variable FSK" section.
Baseband Signal - Baseband Block
To Next Page
Loading...
