Instrument Function
R&S
®
SMBV100A
385Operating Manual 1176.8016.02 ─ 17
ARB MOD Main Menu
The upper part of the menu is used for powering up, selecting and configuring ARB
modulation.
The lower part of the menu is used for setting triggers and clocks, as well as for file
management. Test signals can be output for test purposes.
Multi Segment Waveform Options
The section "Multi Segment Waveform Options" of the menu is only displayed if a multi
segment waveform is loaded.
The section comprises the settings necessary to adjust the trigger for the switch
between the segments of a multi segment waveform. The parameters displayed
depend on the selected trigger source.
The parameters in this sections are identical with the parameters in the section "Next
Segment Trigger In" in the "Trigger/Marker" dialog; for detailed information see "Next
Segment Trigger In" on page 394.
State (ARB)
Enables/disables ARB modulation.
Switching on this standard turns off all the other digital standards and digital modula-
tion types.
Baseband Signal - Baseband Block
To Next Page
Loading...
