Instrument Function
R&S
®
SMBV100A
421Operating Manual 1176.8016.02 ─ 17
n.a.
Repetition Cycles ← Sequencing Play List
Sets the number of times the selected segment is cyclically repeated before the next
segment in the sequence is processed.
n.a.
Next ← Sequencing Play List
Determines the action after completing the current one, like for instance which seg-
ment is processed after the processing of the current one is finished.
"Next Id#"
The next active segment in the play list is processed.
"Blank"
After the processing of the current segment is completed, the signal
output is stopped until a signal restart like a retrigger signal is
received.
A restart signal causes a complete restart of the sequencing play list.
"Endless"
The current segment is re-played until a signal restart like a retrigger
signal is received and the complete sequencing play list is restarted.
Only active segments are considered.
"Goto Id#"
Determines the row number of the segment to be processed next.
This feature is currently limited for the first 32 rows.
Remote command:
n.a.
Info ← Sequencing Play List
Opens a dialog with detailed information about the currently selected waveform.
See also "Waveform Info" on page 387.
Remote command:
n.a.
Append
Inserts a new row at the end of the sequencing play list table.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect on page 648
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend on page 647
Delete
Deletes the selected row.
Remote command:
n.a.
Shift Id# Up/Down
Shifts the selected row up and down.
Remote command:
n.a.
Baseband Signal - Baseband Block
To Next Page
Loading...
