Preparing for Use
R&S
®
SMBV100A
48Operating Manual 1176.8016.02 ─ 17
To remote access the instrument via a web browser:
1. Connect the instrument and the remote computer to a LAN, see Chapter 2.6.1,
"Connecting the Instrument to the Network", on page 43.
2. Instal the Java Runtime Environment JRE on the remote computer.
3. Type the instruments' IP address in the address field of the Web browser on your
PC, e.g. http://10.111.11.1
The "VNC Authentication" screen appears.
4. Enter the password and select "OK".
The default password is "instrument".
After the connection is established, the current signal generator screen with the
block diagram is displayed and the instrument can be remote-accessed from the
remote computer.
Remote Access via an External Controller
To Next Page
Loading...
