Manual Operation
R&S
®
SMBV100A
77Operating Manual 1176.8016.02 ─ 17
Menus are assigned to the specific function blocks in the block diagram. The func-
tion blocks represent elements of signal generation. Function blocks displayed with
a blue frame can be directly switched on and off by means of the TOGGLE
ON/OFF (CTRL+T) key. The menus of the highlighted function blocks can be
called by pressing the ENTER key.
– Example:
The "Baseband" block contains all menus required for baseband signal config-
uration.
In this block all digital standards and the digital modulation can be selected.
●
Signal flow
The signal flow between the function blocks and the employed inputs and outputs
are also shown.
●
Menu tree
The menu tree can be opened and closed with the MENU (CTRL+M) key. The
menu tree is organized in the same way as the directories under Windows. The
function blocks correspond to the first directory level, the menus to subdirectories.
Operation corresponds to the Windows concept
To offer the user a familiar environment, operation is very similar to operation of Win-
dows user interfaces. All menus and tables are made up of known elements, such as
selection lists, check boxes and entry fields.
A blue frame indicates that the selected item is active. In the highlighted element,
entries can be made.
Key Features
To Next Page
Loading...
