Safran VersaSync - Page 124

To open the NTP Setup screen, navigate to MANAGEMENT > NTP Setup. The
NTP Setup screen is divided into 5 panels:
The NTP Servers and Peers panels
… are located on the right-hand side of the NTP screen:
NTP Servers: In this display you can view the NTP Servers that VersaSync
detects in your network. It is through this display that you configure
external NTP references. See "NTP Servers: Adding, Configuring, Remov-
ing" on page121.
NTP Peers: In this display you can view the NTP Peers that VersaSync
detects in your network. It is through this display that you configure NTP
Peer reference inputs. See "NTP Peers: Adding, Configuring, Removing" on
page123.
For more information on NTP servers, clients, and Stratums see "NTP Servers and
Peers" on page118.
The NTP Throughput panel
… shows two graphs depicting the rate of NTP traffic from Clients and Server-
/Peers.
The INFO icon opens a window showing the maximum per second traffic
rate from each.
The graphs maybe saved and downloaded (> ARROWicon), or deleted (>
TRASHCAN icon).
The Actions panel
110
CHAPTER 2 • VersaSync User Manual Rev. 12
2.8 Configuring Network Settings