e. Commands need to be typed in all lower-case letters.
f. Where eth0 and eth1 are the base network ports.
g. User accounts with “user” group permissions can perform “get” commands
Command Description
agnss server Display AGNSS status ie. enabled or disabled
agnss server disable Disable AGNSS server
agnss server enable Enable AGNSS server
agnss server gen
Display almanac generation configuration.
<daily <HH:MM>|interval> Use with arguments to set the
almanac generation configuration to either daily with 24hr
gen time each day or an interval in s between 10 and 86400
agnss server station
Display AGNSS station
<station> Use with arguments to set AGNSS station to a 4-
letter station name.
agnss server record
Display the time in days the records are kept.
<days> Use with argument to set the time the records are
kept between 2 and 400 days.
agnss server all Display all AGNSS information; combines status, time age and list com-
mands.
agnss server status <ephemeris|almanac> Display Ephemeris or Almanac data status.
agnss server time <ephemeris|almanac> Display time in seconds until next data set is
ready.
agnss server age <ephemeris|almanac> Display data age in seconds.
agnss server rnx <GPS|GLO|GAL|BEI> Display list of constellations's satellites found in
today's RINEX file.
clean Restores
VersaSync
configuration, logs, and stats to factory defaults
and reboots
cleanhalt Restores
VersaSync
configuration to factory defaults and halts
To Next Page
Loading...
