Command Description
clearcfg Restores configuration to factory defaults and reboots
clearlogs Clears all logs
clearstats Clears all statistical data (NTP, and oscillator/disciplining)
dateget Displays current date (for example, 15 APR 2015)
dateset Used to set the current date
defcert Used to create a new
Safran
self-signed SSL certificate for HTTPS in
case of expiration of the original certificate
dhcp4get Displays whether DHCP is enabled
dhcp4set Used to enable or disable DHCP
dhcp6get Displays whether DHCPv6 is enabled
dhcp6set Used to enable or disable DHCPv6
dns4cfg Display the configured IPv4 primary and secondary DNS addresses
dns4get Displays the configured DNS servers
dns4set Used to configure the DNS servers
doyget Used to obtain the current Day of Year
doyset Used to set the current Day of Year
gettemp Displays the temperature of the oscillator, board, or CPU
gpsdop Displays GNSS receiver positional accuracy estimates
gpsdserviceportget Displays the GPSD service port
gpsdserviceportset Sets the GPSD service port
gpsinfo Applicable to SAASM-equipped
VersaSync
units only
gpsloc Displays GNSS latitude, longitude and antenna height
gpsmdl Displays the GNSS Manufacturer and Model
gpsreset Resets the GNSS Position stored in the unit.
gpssat Displays GNSS satellites tracked and maximum signal strength being
received
gw4cfg Display the configured IPv4 gateway
gw4get Displays the default IPv4 gateway
gw4set Used to configure the IPv4 gateway addresses
To Next Page
Loading...
