Command Description
gw6cfg Display the configured IPv6 gateway.
gw6get Displays the default IPv6 gateway address
gw6set Used to configure the IPv6 gateway address
halt Used to Halt the system for shutdown
helpcli
Provides list of available commands and syntax
hostget Displays the DNS hostname
hostset Sets the DNS hostname
hotstart Initiate a hot start operation on the SAASM GPS receiver
ip4cfg Display the IPv4 static configuration.
ip4get Displays IPv4 Ethernet port
settings
information (IP address net mask
and gateway)
ip4set Used to set IPv4 Ethernet port
settings
information (IP address net
mask and gateway)
ip6add Used to add IPv6 Ethernet port
settings
information (IP address net
mask and gateway)
ip6cfg Display the IPv6 static configuration
ip6del Used to delete IPv6 IP address
ip6get Used to obtain the IPv6 IP address
iptables See
"Network Services" on page75
for more information.
licenses Displays configured licenses installed (if any)
list Outputs a list of commands
loadconf Restore a saved configuration and reboot
locallist Used to display local clocks
manifest See a list of all files
model Displays the Serial Number of the unit
net Displays network
status
netnum Displays the number of general-purpose network interfaces
net4 Displays IPv4 network
status
net6 Displays IPv6 network
status
To Next Page
Loading...
