Safran VersaSync - Page 6

1.8 Regulatory Compliance 22
1.9 The VersaSync Web UI 23
1.9.1 The Web UI HOME Screen 23
1.9.2 The INTERFACES Menu 24
1.9.3 The Configuration MANAGEMENT Menu 25
1.9.4 The TOOLS Menu 26
CHAPTER 2
SETUP 27
2.1 SAFETY 28
2.1.1 SAFETY: Before You Begin Installation 28
2.1.2 SAFETY: User Responsibilities 29
2.1.3 SAFETY: Other Tips 30
2.2 Installation Overview 30
2.2.1 Hardware Connections 30
2.2.2 Mounting 32
2.2.2.1 Selecting a Mounting Location 32
2.2.2.2 Heat Dissipation 33
2.2.2.3 Fasteners 33
2.2.2.4 Grounding 34
2.3 Initial Network Setup 34
2.3.1 USB Driver 35
2.3.2 Network Connection 35
2.4 Accessing the WebUI 37
2.5 Zero Configuration Setup 39
2.5.1 Using Zeroconf 40
2.6 Setting up an IP Address 40
2.6.1 Assigning a Static IP Address 41
2.7 Configuring Inputs/Outputs 43
2.7.1 Assigning I/O Pins 44
2.7.1.1 Signal Types 45
2.7.1.2 I/O Signal Mapping Table 45
2.7.2 Configure I/O Settings 48
2.7.2.1 How to Configure an Input Reference 48
2.7.2.2 How to Configure an Output 50
IV
VersaSync User Manual • TABLE OF CONTENTS