Safran VersaSync - Page 7

2.7.3 Example: Configuring a 20 PPS Output 50
2.7.4 Configurable I/Os 52
2.7.4.1 Configuring a 1PPS Input 52
2.7.4.2 Configuring a 1PPS Output 53
2.7.4.3 Configuring an ASCII Input 54
2.7.4.4 Configuring an ASCII Output 56
2.7.4.5 Event Broadcast (ASCII Output) 59
2.7.4.6 Configuring a GPIO Output 62
2.7.4.7 Configuring a HaveQuick Input 65
2.7.4.8 Configuring a HaveQuick Output 67
2.7.4.9 The 10MHz Outputs 68
2.7.5 Signature Control 69
2.8 Configuring Network Settings 70
2.8.1 General Network Settings 72
2.8.2 Network Ports 73
2.8.3 Network Services 75
2.8.4 Static Routes 76
2.8.5 Access Rules 77
2.8.6 HTTPS 78
2.8.6.1 Accessing the HTTPS Setup Window 78
2.8.6.2 About HTTPS 79
2.8.6.3 Supported Certificate Formats 80
2.8.6.4 Creating an HTTPS Certificate Request 80
2.8.6.5 Adding HTTPS Subject Alternative Names 83
2.8.6.6 Requesting an HTTPS Certificate 84
2.8.6.7 Uploading an X.509 PEM Certificate Text 86
2.8.6.8 Uploading an HTTPS Certificate File 87
2.8.7 SSH 88
2.8.8 SNMP 96
2.8.8.1 SNMP V1/V2c 101
2.8.8.2 SNMP V3 102
2.8.8.3 SNMP Traps 104
2.8.9 VLAN Support 106
2.8.10 System Time Message 107
2.8.10.1 System Time Message Format 108
2.8.11 Configure NTP 108
2.8.11.1 Checklist NTP Configuration 109
VersaSync User Manual • TABLE OF CONTENTS
V