CHAPTER 2. MMC Programming
2-418
© SAMSUNG Electronics Co., Ltd.
(Continued)
No Code Alarm Name Definition
95 MNF05 Trunk Recovery Out of service trunk detected via loop detected as out of
service is now operational.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
96 MNF06 Trunk Disconnect Out of service trunk detected via seizure of trunk.
External seizure test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
97 MNF07 Trunk Connect Out of service trunk recovered via seizure of trunk.
External seizure test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
100 MNF10 E1 Out Of Srv E1 Digital line status has been changed to out of
service.
Alarm Data = Cabinet, Slot (Cx-Syy)
101 MNF11 E1 In Service E1 Digital line has been restored to normal service.
Alarm Data = Cabinet, Slot (Cx-Syy)
104 MNF14 TODC Error Time of Day Clock in the MCP2 has erred.
108 MNF18 SLI Fault An SLI card has been detected as out of service via an
internal CODEC test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
109 MNF19 SLI Recovery An SLI card detected as out of service has been
detected as recovered and is in service via internal
CODEC test.
Alarm Data = Cabinet, Slot, Port (Cx-Syy-Pzz)
118 MNF28 LAN Printer Err LAN printer error has occurred in the MCP2.
Alarm Data = Data Type (SMDR)
119 MNF29 LAN Printer Rec LAN printer error has recovered in the MCP2.
Alarm Data = Data Type (SMDR)
120 MNF30 SPNet Link Error SPNet LINK connection error
Alarm data=MMC 820 LINK ID INDEX number
121 MNF31 SPNet Send
Error
SPNet message transmission error
Alarm data=xx:yyyy:zz
xx: SPNet TRK INDEX, yyyy: SPNet TRK number, zz:
MMC 820 LINK ID INDEX number
122 MNF32 SVMi Ready SVMi Card Ready start
123 MNF33 SVMi Request SVMi Card Request start
124 MNF34 SVMi Ready End SVMi Card Ready end
125 MNF35 SVMi Request
End
SVMi Card Request end
126 MNF36 SVMi HDD Alarm SVMi Card HDD Alarm
127 MNF37 Manual Reset
Req
Card Manual Reset Request
To Next Page
Loading...
