11
Do not use the voltage
other than specified
• Do not use the power supply voltage other than the one specified.
Doing so could result in a fire or electric shock.
Do not use in
hazardous locations
• The product is not explosion proof certified.
• Do not use in a potentially explosive environment or atmosphere.
Doing so could result in a fire or explosion.
Do not set on an
unstable area
• Do not set the product on an unstable area, such as a wobbly table
or slanted area or on an area subject to strong vibration. The product
could fall or topple over, possibly resulting in injury.
When the product is
dropped or breaks
• If the product is dropped or breaks, immediately power it off, unplug
the power cord from the outlet, and contact your SATO reseller or
technical support. Using the product in one of these conditions could
result in a fire or electric shock.
Handling the power
cord and other cables
• Do not damage, break, or alter the power cord and other cables.
Also, do not place heavy objects on the power cord, apply heat to
it, or forcibly bend, twist, or pull it. Doing so could result in a fire or
electric shock.
• Do not splash water on the power cord or get it wet. Doing so could
result in damage or electric shock.
• If the power cord and other cables becomes damaged (core is
exposed, wires broken, deformed, etc.), contact your SATO reseller
or technical support. Using the power cord and other cables in this
condition could result in a fire or electric shock.
• The dedicated power cord included in the package is to be used
specifically for this product. Do not use it for other electronic
products. Also, do not use the power cord of other products for this
product. Doing so could result in a fire or electric shock.
To Next Page
Loading...
