SATO CL4NX Plus - [Password]

457
Enabled
Enable the indication of the total print count.
Disabled
Disable the indication of the total print count.
• Shows the total print count from the time the product is on until it is off.
When you power off the product, the count is reset to [0].
[Password]
The setting items are as follows:
Password Enable
Enable or disable the password setting.
Install Security
Enable or disable the password input for the package file download.
NFC Security
Set whether to show the confirmation message or enable the password input before settings are
written to the product from an Android device with the NFC interface.
Change Password
Change the password.