SATO CL4NX Plus - Interface; Supported Interfaces; USB Interface

USB Interface
748
Interface
Supported Interfaces
For data communication with the host, the product supports the following interfaces.
Standard
• USB Interface (Type B)
• LAN Interface (Ethernet)
• Bluetooth Interface
• NFC Interface
• USB Interface (Type A) x 2
• RS-232C Interface (DB 9 pins, female)
• IEEE1284 Interface (Amphenol 36 pins)
• External Signal (EXT) Interface (Amphenol 14 pins)
Option
• Wireless LAN Interface
• Do not connect or disconnect the interface cables (or use a switch box) with power
supplied to either the product or host. This may cause damage to the interface circuitry
in the product or host and is not covered by warranty.
• Wireless LAN is an optional interface.
• You cannot use the wireless LAN interface and LAN interface at a time.
• You can set the interface settings of the product through [Interface] in the [Settings]
menu.
USB Interface
This interface complies with the USB2.0 standard.
Install the USB driver to the computer before use.
Basic Specifications
Connector USB Type B connector
Protocol Status4, Status5