[STCL]
402
Disabled
Do not save the user format data registered at printing in the product. The user format data
remains in the product memory after printing until the product is powered off. You need to register
a user format again after reboot.
[STCL]
To use STCL as a printer command, set the following items:
Command Head
Set the command head.
Font Settings
Set the font.
Rotation
Set the page orientation for label printing.
Ignore Paper Size Command
Set whether to ignore a paper size command in the print data.
300DPI Head Compatibility
When you are using the product with 305 dpi resolution, enable or disable 300DPI Head
Compatibility.
To Next Page
Loading...
