[Print Mode]
216
[Print Mode]
Set the print mode.
The options are as follows:
Continuous
Continuously print the specified number of the media. The media remains in position for printing at
all times.
Tear-Off (Feeding media to the position for manual cutting)
After continuously printing the specified number of the media, feed the media to the point to
remove the media. After printing, tear off the media manually. The media will be back to the print
head position for starting the next printing.
Cutter
Cut each media while printing the specified number of media. You can specify this option if you
have installed the cutter unit.
Cut & Print
Allows you to continuously print and cut at the specified media repeat. If no print data is received
within the period specified for [Eject Cut], the product will feed the media to the cut position and
cut the last printed media. You can specify this option if you have installed the cutter unit.
Dispenser
Peel the liner from the printed label as the label is fed to the product’s front. Once the printed label
has been removed from the product for application, the next label will retract and position itself for
printing. You can specify this option if you have installed the dispenser unit.
Linerless
Cut each label while printing the specified number of labels. You can specify this option if you
have installed the linerless cutter kit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
