SATO CL4NX Plus - [Printing] Menu

205
[Printing] Menu
The following settings are available in the [Printing] menu:
Label Length
Set the length of the media.
Label Width
Set the width of the media.
Auto Measure
Automatically measure the length of the media.
Printing Mode
Set whether to print using a ribbon or direct thermal media.
Ribbon Near End
Enable or disable the warning when the ribbon is about to run out.
◦ Appears if you have selected [Use Ribbon] in the [Printing Mode] menu.
Speed
Set the print speed.
Sensor Type
Set the media sensor type.
Micro Label Print Mode
Set the micro label print mode.
Auto-mode
Automatically set the print mode.
Print Mode
Manually set the print mode.