673
[System] Menu
The initial value refers to the setting value of the product when it was shipped from the factory. If you
reset the product, the setting values of the product will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing an initialization removes
all the product's settings that the customer changed.
Setting Item Initial Value User
Reset
Factory
Reset
[Regional]
[Messages] English, US Yes Yes
[USB Keyboard] English, US Yes Yes
[Locale] English, US Yes Yes
[Unit] dot Yes Yes
[Time] 00:00 No No
[Date] (2000-01-01) No No
[Time Zone] - Yes Yes
[Region] Europe Yes Yes
[City] London Yes Yes
[Display Language Icon] Disabled Yes Yes
[Notifications]
[Clean Printhead]
[Clean Printhead] Disabled Yes Yes
[Cleaning Interval] 400 m Yes Yes
[Change Printhead]
[Change Printhead] Disabled Yes Yes
[Printhead Interval] 100 km Yes Yes
[Change Cutter]
[Change Cutter] Disabled Yes Yes
[Cutter Life] 1000 K cuts Yes Yes
To Next Page
Loading...
