[Information] Menu
678
Setting Item Initial Value User
Reset
Factory
Reset
[Support Info] - - -
[Logging Function]
[Enabled] Disabled Yes Yes
[Save] - - -
[Remove] - - -
[Startup Guide] Enabled No Yes
[Information] Menu
The initial value refers to the setting value of the product when it was shipped from the factory. If you
reset the product, the setting values of the product will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing an initialization removes
all the product's settings that the customer changed.
Setting Item Initial Value User
Reset
Factory
Reset
[Help] - - -
[Build Version] - - -
[Applications] - - -
[Installation Log] - - -
[Print Module] - - -
[Counters] - - -
[Head] - - -
[Life] Measured value No No
[Head 1] Measured value No Yes
[Head 2] Measured value No Yes
[Head 3] Measured value No Yes
[Cutter] 0 No Yes
[IPv4 Address] 0.0.0.0 - -
To Next Page
Loading...
