SATO CL4NX Plus - Page 677

677
Setting Item Initial Value User
Reset
Factory
Reset
[Delete] - - -
[Load] - - -
[Save] - - -
[Start with] - Yes Yes
[Certificates] - Yes/
Interface
Yes
[Barcode Checker]
[Test]
[Reader Name] - - -
[Reading Test] - - -
[Interface] RS-232C Yes/
Interface
Yes/
Interface
[Settings]
[Mode] Disabled Yes Yes
[Set No. of Barcodes] Command Yes Yes
[Barcodes per Label] 1 Yes Yes
[Start Position]
203 dpi
72 dots
305 dpi
108 dots
609 dpi
216 dots
Yes Yes
[VOID Print] Disabled Yes Yes
[Retry Count] 0 Yes Yes
[Host Notification] Disabled Yes Yes
[Logs]
[Copy] - - -
[Remove] - - -
[Clone] Excl. LAN/Wi-Fi/IP - -