SATO CL4NX Plus - Configuring the Interface Settings Using the All-In-One Tool

Configuring the Interface Settings Using the All-In-One Tool
112
Change the settings according to the communication conditions of the connected network and
computer.
Configuring the Interface Settings Using the All-In-One Tool
Installing the All-In-One Tool
When you use the All-In-One Tool, you can easily set and manage the product.
Download the All-In-One Tool and All-In-One Tool Manual from the SATO All-In-One Tool download
site http://www.satoworldwide.com/software/all-in-one-tool.aspx, and install the software to a
computer. For the compatible OS, refer to the "System Requirements" section of the All-In-One Tool
Manual.