[Label Length]
206
Backfeed
Set the backfeed operation.
Eject Cut
Set the time from the print completion until the print cut.
◦ Appears if you have selected [Cut & Print] in the [Print Mode] menu.
Darkness Range
Set the range of the print darkness.
Darkness
Set the print darkness.
Imaging
Set the print reference position in the vertical and horizontal directions.
Advanced
Set the sensor operation and print motion.
[Label Length]
Set the length of the media.
The setting range varies depending on the print resolution of the product.
The setting range of the label length is as follows:
Resolution CL4NX Plus
203 dpi
(1 dot = 0.125 mm (0.0049"))
1 to 20000 dots
305 dpi
(1 dot = 0.083 mm (0.0033"))
1 to 18000 dots
609 dpi 1 to 9600 dots
To Next Page
Loading...
