[Tools] Menu
674
Setting Item Initial Value User
Reset
Factory
Reset
[Change Platen]
[Change Platen] Disabled Yes Yes
[Platen Interval] 100 km Yes Yes
[Sound]
[Error Sound] Medium Yes Yes
[Power Off Sound] Medium Yes Yes
[Energy Saving]
[Sleep Timeout] 60 min Yes Yes
[LCD Brightness] 7 No Yes
[Show Total Count] Disabled Yes Yes
[Password]
[Password Enable] Disabled No Yes
[Install Security] Disabled No Yes
[NFC Security] None Yes Yes
[Change Password] No No
[admin] - No No
[manager] 6677 No No
[level1] 0310 No No
[rfid] - No No
[Start on AC] Disabled No Yes
[Tools] Menu
The initial value refers to the setting value of the product when it was shipped from the factory. If you
reset the product, the setting values of the product will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing an initialization removes
all the product's settings that the customer changed.