489
[Start with]
Select the profile to be loaded at product startup.
The procedure to load the profile at product startup is as follows:
1.
Select the profile to be loaded at product startup using the / buttons.
2.
Press the button or the button to confirm.
[Certificates]
Install certificates used for Wi-Fi authentication and for HTTPS.
Available only if you have installed the USB memory.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation cannot be held responsible for any product malfunctions
caused by a virus spread via USB memory.
The setting items are as follows:
To Next Page
Loading...
