SATO CL4NX Plus - [Protocol]

379
[Protocol]
Set the printer language.
The options are as follows:
AUTO
Automatically analyze the received print data and set the printer language. In [AUTO] mode, the
product can change the language after startup by receiving another language.
SBPL
Set when you use the SBPL printer language or XML.
SZPL
Set when you use the SZPL printer language.
SIPL
Set when you use the SIPL printer language.
SDPL
Set when you use the SDPL printer language.
STCL
Set when you use the STCL printer language.
SEPL
Set when you use the SEPL printer language.