SATO CL4NX Plus - Conditions that Trigger Paper End, Label Near End, Ribbon End and Ribbon Near End; Conditions that Trigger Paper End

Conditions That Trigger Paper End
200
Conditions That Trigger Paper End, Label Near End, Ribbon End and
Ribbon Near End
Conditions That Trigger Paper End
The conditions that trigger paper end vary depending on the operation of the product.
Conditions That Trigger Paper End in the Feeding Operation
A paper-end occurs if the no-paper condition persists even after the paper-end sensor detects the no-
paper condition when 15 mm (0.59") continues to be fed.
(1) Print head position
(2) Paper end sensor: I-mark sensor/Gap sensor
Select in [Printing] > [Advanced] > [Paper End] menu, or specify by command.
(3) Media feed direction
Conditions That Trigger Paper End in the Printing Operation
1. The paper end sensor detects a no-paper condition at the position where 15 mm (0.59") has been
fed.