SATO CL4NX Plus - [Auto-Mode]

215
Resolution CL4NX Plus
(1 dot = 0.042 mm (0.0017"))
• Set the label size to a value that includes the liner.
[Auto-mode]
When using [Auto-mode], the print mode changes automatically according to the status of the installed
option unit.
The options are as follows:
Enabled
The print mode changes automatically.
Disabled
The print mode changes according to the setting of the [Print Mode].
• Operate in cutter mode if you have installed the optional cutter unit.
• Operate in dispenser mode if you have installed the optional dispenser unit.
• Operate in linerless mode if you have installed the optional linerless cutter kit.