SATO CL4NX Plus - Page 214

[Micro Label Print Mode]
214
[Label Length Averaging Count]
Set the number of labels measured to be used for averaging the automatically set label length when
the [Micro Label Print Mode] is set to [Enabled] and the [Auto Label Length Detection] is set to
[Enabled].
The setting range is from 1 to 10.
[Label Length]
Set the label length manually when the [Micro Label Print Mode] is set to [Enabled] and the [Auto
Label Length Detection] is set to [Disabled].
The setting range varies depending on the print resolution of the product.
The setting range of the label length is as follows:
Resolution CL4NX Plus
203 dpi
(1 dot = 0.125 mm (0.0049"))
72 to 424 dots
305 dpi
(1 dot = 0.083 mm (0.0033"))
108 to 636 dots
609 dpi 216 to 1272 dots