221
Set the correction value from the standard printing position as "-" for the direction of the paper feed
and "+" for the direction opposite to the paper feed.
(1) Feed direction
The setting range varies depending on the print resolution of the product.
The setting range is as follows:
Resolution CL4NX Plus
203 dpi
(1 dot = 0.125 mm (0.0049"))
-19999 to 0 to 19999 dots
305 dpi
(1 dot = 0.083 mm (0.0033"))
-17999 to 0 to 17999 dots
609 dpi
(1 dot = 0.042 mm (0.0017"))
-9599 to 0 to 9599 dots
[Horizontal]
Set the print position in the horizontal direction.
To Next Page
Loading...
