SATO CL4NX Plus - Page 290

[Network]
290
[Legacy Status for Port 9100]
Set whether to change the return status format of port3 to legacy status.
Does not appear if you have selected [None] in the [Flow Control] menu.
The options are as follows:
Enabled
Change the return status format of port3 to legacy status.
Disabled
Do not change the return status format of port3 to legacy status.
In legacy status, the return status format of port3 becomes as follows:
Status3
Mode Data format
Normal
([Legacy
Status
for Port
9100] is
[Disabled])
Legacy
status
([Legacy
Status for
Port 9100]
is [Enabled])
Status4