295
Enabled
Shows the error message.
Disabled
Does not show the error message.
[Time Server IP]
Set the IP address of the NTP server.
The setting range is as follows:
0.0.0.0 to 255.255.255.255
The IP address should normally be set to 0.0.0.0 (the default value). For the default value, the global
NTP servers are assigned automatically. Set to a valid IP if the time synchronization is requested for a
specific server.
[LPD]
Set the functions for LPD.
The setting items are as follows:
To Next Page
Loading...
