SATO CL4NX Plus - Page 336

[Network]
336
[Time] (SOS users only)
Specifies the time of the specified day or date to perform periodic notifications.
Appears only if you have enabled the NTP function or installed the optional RTC kit, and if you have
selected [Weekly] or [Monthly] in the [Type] menu.
[Update Screen] (SOS users only)
Sets whether to print a QR code displayed with SOS (SATO Online Services) periodic notification or
SOS update.
Appears only if you have selected [On-Demand] in the [SOS Mode] menu.
A specialized application is required to scan the QR code.
The options are as follows:
Normal
Shows the scan screen of a normal QR code.
Print
Prints with the scan screen for the QR code. Press the button to print the QR code.
To print the QR code, use media of more than 33 mm (1.3") in length and more than 33 mm (1.3")
in width (not including the liner).