39
Print Job Status
Icon Description
Waiting for media removal. Remove the media.
Ribbon is near the end. The rest of the ribbon is decreased. Prepare a new
ribbon.
Label is near the end. The rest of the media is decreased. Prepare new media.
Command error detected. Check the print data.
Receive buffer is nearly full. Stop sending print data until the buffer is no longer
nearly full.
Defective print head is detected. Replace the print head.
Incompatible print head is detected. Replace the print head.
Maintenance Status
Icons notify you about cleaning the product and replacing parts at the set periods when [Notifications]
is enabled.
To Next Page
Loading...
