SATO CL4NX Plus - Page 392

[SBPL]
392
[A3 Command Save(S-type)]
Set whether to save all values (with or without +/- sign) specified by the Base Reference Point
command ESC+A3 to the product's [Imaging] menu.
The options are as follows:
Enabled
All values (with or without +/- sign) specified by the command ESC+A3 are saved to the product's
[Imaging] menu.
Disabled
Only values without +/- sign specified with the command ESC+A3 are saved to the product's
[Imaging] menu. Values with +/- sign are not saved.
[PDF417 ECC Level fixed]
Set whether to print the PDF417 code with the security level specified by the PDF417 printing
command.
The options are as follows:
Enabled
Print the PDF417 code with the security level specified by the PDF417 printing command.