SATO CL4NX Plus - Page 412

[SDPL]
412
The options are as follows:
• [Standard]
• [Alternate 1]
• [Alternate 2]
• [Custom]
[SOH]
Set the SOH code.
You can change this if you have selected [Custom] in the [Code Type] menu.
The setting range is from 00 to ff (hexadecimal).
[STX]
Set the STX code.
You can change this if you have selected [Custom] in the [Code Type] menu.
The setting range is from 00 to ff (hexadecimal).