SATO CL4NX Plus - Page 428

[SDPL]
428
[Feedback Character]
Enable or disable the <STX>a command.
You can change this setting if you have selected [Settings] in the [Prioritize] > [Feedback Character]
menu.
The options are as follows:
Enabled
Enable the <STX>a command.
Disabled
Disable the <STX>a command.
[SOH Commands]
Set the SOH commands.
You can change this setting if you have selected [Settings] in the [Prioritize] > [SOH Commands]
menu.
The setting items are as follows:
All Commands
Enable or disable all the SOH commands. You can also select to set each command individually.