501
The setting items are as follows:
Copy
Copy the barcode check log data to the USB memory.
◦ Available only if you have installed the USB memory.
Remove
Remove the barcode check log data.
Format and Contents of the Barcode Check Log Data
The barcode check log data is created in the following format:
Format ID Description
YYYY
Year of the date when the barcode check was performed
1
MM
Month of the date when the barcode check was performed
1
DD
Day of the date when the barcode check was performed
1
hh
Hour of the time when the barcode check was performed
1
mm
Minute of the time when the barcode check was performed
1
ss
Second of the time when the barcode check was performed
1
ZZZ
Time zone
1
TTTTTTT The total number of printed labels after the product is powered on.
*When the total number of printed labels becomes greater than an 8-digit
number, the output digit will increase.
IR The number of read data received after reaching the position at which the
check starts.
*When the check result is "IGNORED", this shows "00".
SRSR Size of read data (bytes)
drdr... Read data
Check resultRRRRRRR
SUCCESS
• In readable mode, this means everything is correct.
• In comparison mode, this means that the read data and
print data match.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
