671
Setting Item Initial Value User
Reset
Factory
Reset
[Code Type] Standard Yes Yes
[SOH] 01 Yes Yes
[STX] 02 Yes Yes
[CR] 0D Yes Yes
[CNTBY] 5E Yes Yes
[Label Rotation] 0 degree Yes Yes
[SOP Emulation] Auto Yes Yes
[Compatible Mode]
[TTF] Disabled Yes Yes
[Graphics] Disabled Yes Yes
[Compression] Disabled Yes Yes
[Right-to-Left print] Auto Yes Yes
[Receive TimeOut] 0 (Off) Yes Yes
[Blank Item Feed] Enabled Yes Yes
[Prioritize]
[Format Attribute] Commands Yes Yes
[Pause Mode] Commands Yes Yes
[1 Byte Codepage] Commands Yes Yes
[SDPL Measure Unit] Commands Yes Yes
[Scalable Font Style] Commands Yes Yes
[Sensor Type] Commands Yes Yes
[Feedback Character] Commands Yes Yes
[SOH Commands] Commands Yes Yes
[Module Selection] Commands Yes Yes
[Darkness] - Yes Yes
[Factory Offset] - Yes Yes
[Speed] - Yes Yes
To Next Page
Loading...
