SATO CL4NX Plus - Page 705

705
Error Message 1008 (Out of Paper)
When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
To clear the error:
Load the media and open/close the print head, or press the button (OFFLINE) or the
button.
Cause and Countermeasure
Cause (1)
The media is not loaded.
Countermeasure (1)
Load the media.
Loading the Media
Cause (2)
The media is not loaded correctly.
Countermeasure (2)
Load the media correctly.
Loading the Media
Cause (3)
The media sensor level is not set correctly.
Countermeasure (3)
Adjust the media sensor level.
Calibrate
Cause (4)
The media has jammed.