Sirona Sinius - Page 102

63 22 726 D3561
102 D3561.201.01.03.02 05.2012
4 Operation Sirona Dental Systems GmbH
4.5 Dentist element Operating Instructions SINIUS / SINIUS CS
Electric motor, increments with quick setting keys
Setting the speed with function levels
✔ The Start program without instrument functions operating mode is
selected.
✔ The electric motor is removed.
✔ The Motor screen is displayed on the touchscreen.
➢ Set the speed using the – and + keys.
< 0.5 s coarse adjustment, > 0.5 s fine adjustment
 The selected speed is displayed in the first line in rpm
(revolutions per minute).
Increments for coarse adjustment, see "Selecting the speed with the
quick setting keys" (above).
Increments for fine adjustment, see "Selecting intermediate speed values
with the quick setting keys" (above).
Setting the speed in the Start program with instrument functions
✔ The Start program with instrument functions operating mode is
selected.
✔ The electric motor is removed.
✔ The selected motor speed is displayed on the touchscreen.
➢ Change the speed using the – and + keys.
< 0.5 s coarse adjustment, > 0.5 s fine adjustment
 The selected speed is displayed in the first line in rpm
(revolutions per minute).
Increments for coarse adjustment, see "Selecting the speed with the
quick setting keys" (above).
Increments for fine adjustment, see "Selecting intermediate speed values
with the quick setting keys" (above).
IMPORTANT
Increments
The size of the increments depends on the speed range setting.
For BL, BL ISO C motors:
From 90 to 400 rpm = 10 rpm increments
From 400 to 5,000 rpm = 200 rpm increments
From 5,000 to 40,000 rpm = 1,000 rpm increments
For BL ISO S motors:
From 200 to 2,000 rpm = 200 rpm increments
From 2,000 to 10,000 rpm = 400 rpm increments
From 10,000 to 40,000 rpm = 1,000 rpm increments
Please note that the speed of the burr depends on the selected straight
or contra-angle handpiece.