Sirona Sinius - Freely Selectable Function; Clean; Setup

63 22 726 D3561
D3561.201.01.03.02 05.2012
81
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.5 Dentist element
båÖäáëÜ
Setting the flushing time
1. Press and hold the Flushing key on the dentist element (> 2 s).
 The
Flushing settings screen appears on the touchscreen.
2. Set the flushing time with the + and – keys.
Link flushing to mouth rinsing position S
➢ Touch the Link flushing to mouth rinsing position S key.
 If the key is marked orange, flushing is automatically activated for
the duration of the flushing time set when approaching the mouth
rinsing position S.
4.5.4.9
Freely selectable function
Freely selectable function
Bell
e.g. call key
Freely available relay 230 V, 6 A
(connected by service engineer).
This function can be preset as a pushbutton or as a switch in the Setup
program, see "Setting the bell/hash key as a pushbutton or as a
switch" [ → 162].
Hash
Freely available relay 230 V, 6 A
(connected by service engineer).
This function can be preset as a pushbutton or as a switch in the Setup
program, see "Setting the bell/hash key as a pushbutton or as a
switch" [ → 162].
4.5.4.10
Clean
Clean
Pressing this key deactivates the complete user interface of the dentist
element. Pressing it again > 2 s reactivates the control panel.
This is used to make sure that no unwanted functions can be accidentally
triggered while cleaning the surface, see "Disinfecting the
EasyTouch" [ → 172].
4.5.4.11
Setup
Setup
Used for individual configuration of the treatment center by the user and
for reading out messages by the service engineer, see "Configuration of
the treatment center (Setup)" [ → 157].