63 22 726 D3561
D3561.201.01.03.02 05.2012
37
Sirona Dental Systems GmbH 3 Unit description
Operating Instructions SINIUS / SINIUS CS 3.7 Dentist element
båÖäáëÜ
3.7.4 Fixed keys on the dentist element
Fixed keys on the dentist element
For a more detailed description of the fixed key functions, see "Fixed keys
on the dentist element" [ → 76].
Fixed keys on the dentist element
Main switch
Switches the treatment center on/off.
To switch off the treatment center, press and hold the key until an
acoustic signal sounds. Then release the key.
Power switch
Program change keys
The program change keys allow the user to switch between the main
programs
Start program
,
Instrument program
and
SIVISION program
in
the
Start program without instrument functions
mode.
In the
Start program with instrument functions
mode the program change
keys
Chair
and
Instrument
can be used to switch to the relevant sub-
screens.
Timer function
Opens the
Timer Function
screen where any of four preset timers can be
activated. The time lapse is displayed in the footer of the touchscreen.
When the
Timer Function
key is pressed (> 2 s), the
Timer Function
settings screen appears.
Shock positioning
Immediately moves the patient chair to a position for shock positioning of
the patient.
Operating light
Switches the operating light on/off.
When the operating light key is pressed (> 2 s), the
Light Intensity
settings screen appears (not in the case of the LEDview S).
Composite function
Switches the composite setting for the operating light on/off.
This function is required to prevent the premature curing of composite
fillings.
Reduced light intensity < 8,000 lux
Tumbler filling
Starts or stops the tumbler filling function.
When the
Tumbler filling
key is pressed (> 2 s), the filling time and water
heating settings screen appears.
IMPORTANT
Power switch
The treatment center also features a power switch on the base of the
chair that separates the treatment center from the power supply, see
"Switching the treatment center on/off" [ → 45].