Sirona Sinius - SIROSONIC TL Scaler; Safety Information

63 22 726 D3561
110 D3561.201.01.03.02 05.2012
4 Operation Sirona Dental Systems GmbH
4.5 Dentist element Operating Instructions SINIUS / SINIUS CS
4.5.13 SIROSONIC TL scaler
SIROSONIC TL scaler
The SIROSONIC TL scaler is used for removing plaque and for
endodontic treatments.
Ultrasonic handpiece, observe the Operating Instructions
4.5.13.1
Safety information
Safety information
The torque wrench is used as a tool for screwing in instrument tips and,
at the same time, to protect against injury.
Ultrasoni c handpiece, torque wrench
Ultrasonic handpiece, only Sirona tips
The instrument light is generated by a powerful LED located at the
instrument end of the hose. The light is fed through the instrument via a
light guide.
Ultrasonic handpiece, laser radiation
IMPORTANT
Also observe the operating instructions of the SIROSONIC TL.
!
CAUTION
Ultrasonic tips are sharply pointed.
There is a risk of injuring one's hand on the deposited scaler.
➢ Always attach the torque wrench to the scaler for protection as soon
as you deposit the handpiece.
CAUTION
In some cases, ultrasonic tips from other manufacturers do not
guarantee safe operation.
➢ Use only ultrasonic tips from Sirona.
CAUTION
The ultrasonic hose contains an LED that falls under laser class 2.
If the ultrasonic handpiece is switched on with the instrument hose
removed, there is a risk of eye damage.
➢ Do not switch the scaler on when the ultrasonic handpiece is
removed from the instrument hose.
➢ Never look into the LED at the end of the hose.