63 22 726 D3561
D3561.201.01.03.02 05.2012
69
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.4 Patient chair
båÖäáëÜ
4.4.7.3
Using the last position memory function
Using the last position memory f unction
The last chair position is stored before the patient chair moves to mouth
rinsing position S. When mouth rinsing position key
S
is pressed again,
the treatment center returns to the previously set treatment position.
✔ The patient chair is located in any treatment position.
1. Press the
S
key on the touchscreen, or press the
S
key on the user
interface of the assistant element, or press the left button of the foot
control (with all instruments in place in their holders).
The treatment center moves to the mouth rinsing position.
2. Press the
S
key on the touchscreen, or on the user interface of the
assistant element, or press the left button of the foot control again.
The treatment center automatically returns to the position where
the patient chair was located prior to the mouth rinsing position.
4.4.7.4
Activating other chair programs
Activating other chair prog rams
✔ The
Start program
is displayed on the touchscreen.
➢ Touch the
1
key or the
2
key briefly (< 2 s).
To Next Page
Loading...
