63 22 726 D3561
D3561.201.01.03.02 05.2012
143
Sirona Dental Systems GmbH 4 Operation
Operating Instructions SINIUS / SINIUS CS 4.10 Operating light
båÖäáëÜ
4. Use the – and + keys to adjust the brightness of the operating light.
LEDview S brightness
LEDview S brightness
The brightness of the LEDview S operating light can only be adjusted by
the technician.
4.10.2 Switching the dentist element composite function on/off
Switching the dentist element composite function on/off
Composite function
With the composite function, the operating light can be operated at
reduced brightness.
This function is required to prevent the premature curing of composite
fillings.
➢ Press the
Composite Function
fixed key.
If the composite function is switched on, the LED of the fixed key
lights up on the dentist and assistant elements.
4.10.3 Activating operating light on the assistant element
Activating operating light on the assistant element
Controlling operating light on assistant element
Repeatedly press the fixed key
Operating light
to set the following
switching positions at the assistant element:
1. Switched on: The operating light is switched on at the set brightness
level.
2. Composite function: The operating light is operated with reduced
brightness to prevent the premature curing of composite fillings.
3. Deactivated
➢ Press the
Operating light
fixed key, repeat if necessary.
The examination light switches to “switched on”, “composite
function” or “switched off”. If the operating light is in use, the LED
on the fixed key lights up on the dentist and assistant elements.
To Next Page
Loading...
