EasyManua.ls Logo

Sirona Sinius - Saving Instrument Settings

Sirona Sinius
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
63 22 726 D3561
84 D3561.201.01.03.02 05.2012
4 Operation Sirona Dental Systems GmbH
4.5 Dentist element Operating Instructions SINIUS / SINIUS CS
4.5.6 Saving instrument settings
Saving instrume nt settings
With quick setting keys
You can determine whether the
Save
key should be displayed in the
Instrument programs with the quick setting keys, see "Preselecting quick
setting keys with SaveMode/with DropMode or function levels" [ 165].
SaveMode SaveMode – The
Memory
key is displayed in the instrument
programs:
The settings made in the Instrument program will be saved after the
instrument is placed in its holder only if the
Memory
key was pressed
and held beforehand (> 2 s).
Quick setting keys, instruments placed in a horizontal position
After an instrument is removed, the previously saved settings are preset.
An instrument is removed.
The Instrument program with quick setting keys is displayed with the
Memory
key.
The desired settings are made; see also "General instrument
functions" [ 87].
Press and hold the
Memory
key.
An audible signal sounds. The settings in the Instrument program
and its sub-screen are saved.
DropMode DropMode –
Memory
key hidden in Instrument programs:
When the instrument is deposited, the settings made in the
Instrument program will automatically be saved.
With function levels
The settings which have been made can be saved to and recalled from
two function levels (E1, E2). These settings can nevertheless be changed
during treatment.
Function levels, instruments position ed horizontally
An instrument is removed.
The Instrument program with function levels is displayed on the
touchscreen.
All settings are made; see also "General instrument
functions" [ 87].
1. Press and hold key
E1
or
E2
(> 2 s).
An audible signal sounds. The settings in the Instrument program
and its sub-screen are saved to the corresponding function level.
2. Repeat this procedure for the second function level.
The settings can be recalled by briefly touching the key (< 2 s).

Table of Contents

Other manuals for Sirona Sinius

Related product manuals