Sirona Sinius - 10 Overview of All Function Keys

63 22 726 D3561
D3561.201.01.03.02 05.2012
225
Sirona Dental Systems GmbH 10 Overview of all function keys
Operating Instructions SINIUS / SINIUS CS 10.1 Fixed keys
båÖäáëÜ
10
Overview of all function keys
Overview of all function keys
For operating instructions
The following contains a brief description of the fixed keys on the dentist
and assistant elements and the function keys on the touchscreen and to
provide the reader with a quick overview of the significance of the
symbols on the keys. Detailed descriptions can be found in the
corresponding sections of this document.
10.1
Fixed keys
Fixed keys
10.1.1 Dentist element
Dentist el ement
Main switch
Switches the treatment center on/off.
To switch off the treatment center, press and hold the key until an
acoustic signal sounds. Then release the key.
Power switch
Program change keys
The program change keys allow the user to switch between the main
programs
Start program , Instrument program and SIVISION program in
the
Start program without instrument functions mode.
In the
Start program with instrument functions mode the program change
keys
Chair and Instrument can be used to switch to the relevant sub-
screens.
Timer function
Opens the
Timer Function screen where any of four preset timers can be
activated. The time lapse is displayed in the footer of the touchscreen.
When the
Timer Function key is pressed (> 2 s), the Timer Function
settings screen appears.
Shock positioning
Immediately moves the patient chair to a position for shock positioning of
the patient.
Operating light
Switches the operating light on/off.
When the operating light key is pressed (> 2 s), the
Light Intensity
settings screen appears (not in the case of the LEDview S).
IMPORTANT
Power switch
The treatment center also features a power switch on the base of the
chair that separates the treatment center from the power supply, see
"Switching the treatment center on/off" [ → 45].