Sirona Sinius - Page 235

63 22 726 D3561
D3561.201.01.03.02 05.2012
235
Sirona Dental Systems GmbH 10 Overview of all function keys
Operating Instructions SINIUS / SINIUS CS 10.6 SIVISION program
båÖäáëÜ
Smooth image
To mitigate high-contrast or high-interference effects in images, the
contrast between neighboring pixels is reduced or averaged. The overall
definition of the image is reduced.
Sharpen image
Contrasts between neighboring pixels are increased. This function helps
to accentuate edges or contours. The impression of a sharper image is
created.
Filter black dots
Individual pixel errors may occur when taking digital X-rays. These pixel
errors appear as individual black dots when the optimum resolution
(100%) is selected. They are removed by SIDEXIS.
Reduce noise
Individual scattered pixels and minor disturbing information which lead to
a noisy image are eliminated without reducing the overall definition of the
image.
Undo
The effect of the last filter operation is undone.
Restore original image
The changes previously made, e.g. via filters, are canceled. The most
recently saved version of the image is restored.
10.6.4 SI-Video
SI-Video
Start SI Video
SI Video is started on the external PC if SIDEXIS is not installed on it. Or:
SI Video is started on the internal PC if the treatment center is operated
as a standalone unit. The keys belonging to the SI Video PC application
are displayed on the right side of the touchscreen:
SI Video keys
Selecting the next quadrant
In single image mode, the still image in the next quadrant is displayed. In
quad image mode, the next quadrant is highlighted.
Quad image
Display quad image or single image Up to four single images are
simultaneously displayed on the SIVISION monitor in quad image mode.
Deleting images
All generated still images are deleted.